The B&C SI line of softmount industrial washer-extractors are perfect for on premises laundries, commercial and industrial laundry applications. B&C Technologies washers are designed to be effortless and powerful while maintaining a low cost of ownership. These washing machines have fewer parts, fewer things to break, which lead to less down time for the equipment and fewer repairs. In addition the machines are engineered with the finest components to ensure a longer lasting machine. Every component that comes into contact with the wash solution is 304 stainless steel.
B&C Technologies SI Series Industrial Washers
CAPACITIES (lbs.): 200, 275, 475
WASHER-EXTRACTOR: Softmount
B&C Technologies SI Line of industrial softmount washer extractors. High speed industrial strength washer extractors for large sized on premises laundry, commercial and industrial laundry applications. Easy to use microprocessor FM7 control, programmable water levels, speeds and more. Available in 200, 275, and 475 pound capacities.
- 320G extraction equals less time in the dryer
- Powerful and easy to use control
- Can be installed on upper floors
- 5 compartment supply dispenser for liquid and dry chemicals
- 5 connections for automatic chemical injection
- Large door opens nearly 180 degree for easier loading and unloading
- Cast steel housing
- Dry zone bearings are not damaged should seals leak
- Inverter Drive programmable variable speed
- Single motor drive
FM7 Control
Advanced Microprocessor Control
- Easy to use
- Large bright display
- 30 wash programs
- Programmable water levels, speeds and more
- Bluetooth programming
- Tilting, 1 or 2 way
- 40” hydraulic assist door on SI275 (Standard on SI-475)
- Direct steam heating (Standard on SI-475)
- Water reuse inlet and drain
- Rear drain (optional on SI-475)
- EMI filter
The SI Series – Softmount High-Speed Industrial Strength Washer-Extractors for Medium to Large Sized On Premise Laundry, Commercial and Industrial Laundry Applications, Including:
- Resorts, Hotel, Hospitality and other commercial laundry applications
- Healthcare
- Corrections
Saves Money and the Environment
SAVE ELECTRICITY
The HE Family washer uses the most technologically advanced frequency inverter available today which offers an improvement of over 30% compared to multi-motor and other line started motors used on older or less advanced machines. The 320G extract force removes significantly more water than older, outdated machines as well, reducing drying times that saves you money on natural gas, time, plus reducing wear on your goods.
SAVE WATER
The FM7 allows control over the water levels in the machine within one half of an inch, allowing the water level to be dialed in precisely for each wash program step. No more compromising with only 2 or 3 wasteful water levels.
More Savings Through Precision Programming
The flexible FM7 control allows additional water savings through precision programming. It is possible to program a diluting extract, which increases the effectiveness of the rinse steps and eliminates the need for extra rinsing. By eliminating water, wash chemicals and soils in this manner, as many as 2 rinses can be replaced and up to 10 minutes can be saved. Water consumption per cycle can be reduced by almost 1/2 gallon per pound of wash capacity. For example, an SI-200 washer programmed in this manner can expect to save over 90 gallons per wash program.
Specifications
SI-200 Basic Specifications
| Units | US | Metric |
|---|---|---|
| Capacity | 200 lbs | 90.9 kg |
| Cylinder Volume | 30.8 cu ft | 872.2 liters |
| Width | 64.17 in | 1630 mm |
| Depth | 70.86 in | 1800 mm |
| Height | 75.39 in | 1915 mm |
| Weight | 7765 lbs | 3529.5 kg |
| G Force | 320 | |
| Door Opening | 24.5 in | 622 mm |
| Door Height | 35.4 in | 899 mm |
SI-275 Basic Specifications
| Units | US | Metric |
|---|---|---|
| Capacity | 275 lbs | 125 kg |
| Cylinder Volume | 41.8 cu ft | 1183.6 liters |
| Width | 74.01 in | 1880 mm |
| Depth | 86.64 in | 2201 mm |
| Height | 85.03 in | 2160 mm |
| Weight | 9560 lbs | 4345.5 kg |
| G Force | 320 | |
| Door Opening | 28.5 in | 724 mm |
| Door Height | 36.5 in | 927 mm |
SI-475 Basic Specifications
| Units | US | Metric |
|---|---|---|
| Capacity | 475 lbs | 215.9 kg |
| Cylinder Volume | 75.3 cu ft | 2132.3 liters |
| Width | 91.8 in | 2332 mm |
| Depth | 106.3 in | 2700 mm |
| Height | 108.9 in | 2766 mm |
| Weight | 18500 lbs | 8409.1 kg |
| G Force | 320 | |
| Door Opening | 40.2 in | 1021 mm |
| Door Height | 39.4 in | 1001 mm |
SHOP THE BEST IN THE COMMERCIAL LAUNDRY INDUSTRY FROM LNG LAUNDRY EQUIPMENT
SI-200
B&C Technologies
$86,530.00
- Advanced microcomputer, PC programmable
- 5 compartment dispenser for chemicals
- 5 connections for automatic chemical injection
- Stainless steel cabinet. All parts in contact with the wash solution made of 304 stainless steel.
- Inverter drive – programmable variable speed
- Robust spring suspension
SI-275
B&C Technologies
$104,005.00
- Advanced microcomputer, PC programmable
- 5 compartment dispenser for chemicals
- 5 connections for automatic chemical injection
- Stainless steel cabinet. All parts in contact with the wash solution made of 304 stainless steel.
- Inverter drive – programmable variable speed
- Robust spring suspension
SI-475
B&C Technologies
$223,070.00
- Advanced microcomputer, PC programmable
- 5 compartment dispenser for chemicals
- 5 connections for automatic chemical injection
- Stainless steel cabinet. All parts in contact with the wash solution made of 304 stainless steel.
- Inverter drive – programmable variable speed
- Robust spring suspension