CMV Sharper Finish ironers are built to provide the best industrial ironing for all types of fabrics to the on premises laundry and commercial laundries. Wide range of commercial flatwork ironers available in many different roll diameters including those with built-in folders. These machines are known to be green, simple, and efficient. Cylinder type flatwork ironers used in hotels, hospitals, healthcare, restaurants, hospitality, nursing homes, dry cleaning, ships, rental companies and other sites when the need of quality finished goods is critical. Cylinder diameters range from 7” (178 mm) to 36” (915 mm) and are available in widths from 36” (915 mm) to 136” (3454 mm).
Commercial Laundry On Premises Ironers
Finish Rite Flatwork Ironers
Product Overview
CMV Sharper Finish ironers for small laundries (7 inch/178 mm) diameter, single operator, front return, the ironed and dried linen back to the operator. The Finish Rite by CMV Sharper Finish for on premises laundry greatly simplifies ironing. Ideal for tablecloths, napkins or pillow cases, sheets and other large linen can be folded. The Finish Rite requires minimal floor space, it can be placed against a wall, saving space in your laundry.
Key Features
- Choice of 48″ or 60″ working width
- Gas or Electric heating
- Intelatrol I Energy and Safety Device
- Finish Rite standard speed range of 14 FPM (4.3 m/min)
- The Finish Rite ironer uses nomex padding and ribbons
- E.T.L. approved
- Canopy with exhaust motor and blower
Impress 950 Flatwork Ironers
Product Overview
CMV Sharper Finish Impress 950, 12 inch (305 mm) diameter, flatwork ironer for small to medium sized on premises laundries. Perfect for hotels, restaurants, party rentals and dry cleaners. Choice of 56 inch (1423 mm), 66 inch (1677 mm), and 85 inch (2159 mm). Quality ironing, the Impress ironer uses nomex padding and ribbons with automated pressure regulation to iron, dry and remove wrinkles.
Key Features
- Choice of 56″, 66″ and 85″ working width
- Standard variable speed range of 10-30 FPM
- Nomex padding and ribbons
- Gas, Electric and Steam heating on all models
- Many safety features: Intelatrol I, ETL approved
- Front, rear, and side interlocked guards and 24v controls
- Canopy with exhaust motor and blower
Model 1200 Flatwork Ironers
Product Overview
12 inch (305mm) diameter cylinder CMV Sharper Finish Flatwork ironer for medium sized on-premise laundry. The model 1200 requires minimal floor space. Rear delivery models will greatly increase your ironer production. Commercial ironers for OPL laundries, hotels, hospitality, party rental applications, and dry cleaning.
Key Features
- Choice of 85″, 100″, 110″, 120″, 132, and 136″ working width
- Monitoring system, the Intelatrol I will shut off the heat after twenty minutes
- Intelatrol I, standard on gas and electric models
- Standard variable speed range of 10-30 FPM
- Nomex padding and ribbons
- Gas, Steam and Electric heating
- Front loading (standard) or rear unloading (optional)
- Safety features include front, rear, and side interlocked guards, and 24v controls
- Canopy with exhaust blower and motor
Model 1600 & Model 2000 Flatwork Ironers
Product Overview
CMV Sharper Finish single cylinder ironer design, 16 inch (406 mm) diameter & 20 inch (508 mm) diameter (OPL) on premises laundry ironers for medium to semi large laundries. Made by “The Ironer People”, Better, Stronger, Faster, CMV ironers let you do more with less. Choice of: 85 inch (2159 mm), 90 inch (2286 mm), 100 inch (2540 mm), 110 inch (2794 mm), 120 inch (3050 mm), 132 inch (3353 mm), and 136 inch (3400 mm).
Key Features
- Intelatrol I Energy and Safety device is standard on gas and electric models
- Variable speed range model 1600 of 15-40 FPM and model 2000 of 20-50 FPM
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust blower and motor is standard on all models
- Gas, Steam and Electric heating
- Ironed return to front (standard) and read unloading (optional)
Model 2400 Flatwork Ironers
Product Overview
24 inch (610 mm) diameter cylinder CMV Sharper Finish on premise ironers for large industrial or commercial laundries. The Model 2400 flatwork ironer is Highest in Quality, Energy Efficient, Advanced Safety Features, and Minimum Space. Perfect for resorts & hotels, healthcare, commercial hospitality, and cruise ships. Available in gas, steam and electrically heated.
Key Features
- Choice of 100″, 110″, 120″, 132″ and 136″ working width
- Intelatrol I and II Safety Devices standard on gas models
- Standard drive or inverter drive speed range of 20-65 FPM (specify when ordering)
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Front unloading (standard) and rear unloading (optional)
Model 3000 & Model 3600 Flatwork Ironers
Product Overview
CMV Sharper Finish industrial high capacity heated roll ironer, 30 inch (762 mm) and 36 inch (915 mm) roll diameter flatwork ironing system for large laundries. The Models 3000 & 3600 both have oversized pressure rolls to produce outstanding quantity and exceptional quality of ironed flatwork. Available Gas and Steam heated.
Key Features
- Choice of 120″, 132″ and 136″ working width
- Intelatrol I and II Safety Devices standard on gas models
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Ironed work delivered to front or rear
- Inverter drive speed range model 3000 of 30-85 FPM and model 3600 of 30-110 FPM
Finish Master Flatwork Ironers W/Folder
Product Overview
Sharper Finish large diameter rolls ironers 16″, 20″, 24″, 30″ and 36″ (406mm, 508mm, 610mm, 762mm and 915mm) industrial flatwork ironing system (with built in primary folder). Built-In Accufold – The built-in automatic primary folder increases production and reduces labor cost. The Finish Master from CMV Sharper Finish can fold round tablecloths. Folded linen can be removed from the front or rear of the ironer.
Key Features
- Choice of 120″, 132″ and 136″ working width
- Available in Gas, Steam or Electrically Heated (see models for details)
- Intelatrol I and II Safety Devices standard on gas models, steam and gas (optional)
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Ironed work delivered to front or rear
- Variable speed (standard), inverter drive (optional) standard on models 3000 & 3600
IFC/IFCS Ironer-Folder-Stacker-Conveyor
Product Overview
CMV Sharper Finish IFC/IFCS all-in-one models, industrial flatwork ironing system. IFC – Ironer with built-in folder and crossfolder. Dries, irons, primary folds, and crossfolds. The larger the diameter of the ironing cylinder, the more pieces the IFC will dry, iron, and fold. IFCS– Ironer with built-in folder, crossfolder, stacker-conveyor. Dries, irons, primary folds, crossfolds, stacks, and returns to the front. With the IFCS stacker, only two operators are needed. For those ‘tight space’ on premise or commercial laundries. Linen goes in, and returns ironed, folded, and stacked!
Key Features
- Four production sizes are available: 20″ (508 mm); 24″ (610 mm); 30″ (762 mm): 36″ (915 mm).
- Choice of 120″ (3050 mm); 132″ (3353 mm) and 136″ (3400mm)
- Gas and Steam heating
- Many safety advantages, Intelatrol I and II monitoring system
- Inverter drive, variable speed range 20-100 FPM scope
- Left or right discharge for cross folded linens
- Front or rear discharge for linens with primary folds
CMV Sharper Finish Flatwork Ironer
FINISH RITE
(7 inch/178 mm) roll diameter
Product Overview
CMV Sharper Finish ironers for small laundries (7 inch/178 mm) diameter, single operator, front return, the ironed and dried linen back to the operator. The Finish Rite by CMV Sharper Finish for on premises laundry greatly simplifies ironing. Ideal for tablecloths, napkins or pillow cases, sheets and other large linen can be folded. The Finish Rite requires minimal floor space, it can be placed against a wall, saving space in your laundry.
Key Features
- Choice of 48″ or 60″ working width
- Gas or Electric heating
- Intelatrol I Energy and Safety Device
- Finish Rite standard speed range of 14 FPM (4.3 m/min)
- The Finish Rite ironer uses nomex padding and ribbons
- E.T.L. approved
- Canopy with exhaust motor and blower
CMV Sharper Finish Flatwork Ironer
IMPRESS 950
12 inch (305 mm) diameter
Product Overview
CMV Sharper Finish Impress 950, 12 inch (305 mm) diameter, flatwork ironer for small to medium sized on premises laundries. Perfect for hotels, restaurants, party rentals and dry cleaners. Choice of 56 inch (1423 mm), 66 inch (1677 mm), and 85 inch (2159 mm). Quality ironing, the Impress ironer uses nomex padding and ribbons with automated pressure regulation to iron, dry and remove wrinkles.
Key Features
- Choice of 56″, 66″ and 85″ working width
- Standard variable speed range of 10-30 FPM
- Nomex padding and ribbons
- Gas, Electric and Steam heating on all models
- Many safety features: Intelatrol I, ETL approved
- Front, rear, and side interlocked guards and 24v controls
- Canopy with exhaust motor and blower
CMV Sharper Finish Flatwork Ironer
1200
12 inch (305 mm) diameter
Product Overview
12 inch (305mm) diameter cylinder CMV Sharper Finish Flatwork ironer for medium sized on-premise laundry. The model 1200 requires minimal floor space. Rear delivery models will greatly increase your ironer production. Commercial ironers for OPL laundries, hotels, hospitality, party rental applications, and dry cleaning.
Key Features
- Choice of 85″, 100″, 110″, 120″, 132, and 136″ working width
- Monitoring system, the Intelatrol I will shut off the heat after twenty minutes
- Intelatrol I, standard on gas and electric models
- Standard variable speed range of 10-30 FPM
- Nomex padding and ribbons
- Gas, Steam and Electric heating
- Front loading (standard) or rear unloading (optional)
- Safety features include front, rear, and side interlocked guards, and 24v controls
- Canopy with exhaust blower and motor
CMV Sharper Finish Flatwork Ironer
1600 & 2000
20 inch (508 mm) diameter
16 inch (406 mm) diameter
Product Overview
CMV Sharper Finish single cylinder ironer design, 16 inch (406 mm) diameter & 20 inch (508 mm) diameter (OPL) on premises laundry ironers for medium to semi large laundries. Made by “The Ironer People”, Better, Stronger, Faster, CMV ironers let you do more with less. Choice of: 85 inch (2159 mm), 90 inch (2286 mm), 100 inch (2540 mm), 110 inch (2794 mm), 120 inch (3050 mm), 132 inch (3353 mm), and 136 inch (3400 mm).
Key Features
- Intelatrol I Energy and Safety device is standard on gas and electric models
- Variable speed range model 1600 of 15-40 FPM and model 2000 of 20-50 FPM
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust blower and motor is standard on all models
- Gas, Steam and Electric heating
- Ironed return to front (standard) and read unloading (optional)
CMV Sharper Finish Flatwork Ironer
2400
24 inch (610 mm) diameter
Product Overview
24 inch (610 mm) diameter cylinder CMV Sharper Finish on premise ironers for large industrial or commercial laundries. The Model 2400 flatwork ironer is Highest in Quality, Energy Efficient, Advanced Safety Features, and Minimum Space. Perfect for resorts & hotels, healthcare, commercial hospitality, and cruise ships. Available in gas, steam and electrically heated.
Key Features
- Choice of 100″, 110″, 120″, 132″ and 136″ working width
- Intelatrol I and II Safety Devices standard on gas models
- Standard drive or inverter drive speed range of 20-65 FPM (specify when ordering)
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Front unloading (standard) and rear unloading (optional)
CMV Sharper Finish Flatwork Ironer
3000 & 3600
30 inch (762 mm) diameter
36 inch (915 mm) diameter
Product Overview
CMV Sharper Finish industrial high capacity heated roll ironer, 30 inch (762 mm) and 36 inch (915 mm) roll diameter flatwork ironing system for large laundries. The Models 3000 & 3600 both have oversized pressure rolls to produce outstanding quantity and exceptional quality of ironed flatwork. Available Gas and Steam heated.
Key Features
- Choice of 120″, 132″ and 136″ working width
- Intelatrol I and II Safety Devices standard on gas models
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Ironed work delivered to front or rear
- Inverter drive speed range model 3000 of 30-85 FPM and model 3600 of 30-110 FPM
FINISH MASTER
CMV Sharper Finish Flatwork Ironer W/Folder
1600, 2000, 2400, 3000 & 3600
16", 20", 24", 30" and 36" (406mm, 508mm, 610mm, 762mm and 915mm)
Product Overview
Sharper Finish large diameter rolls ironers 16″, 20″, 24″, 30″ and 36″ (406mm, 508mm, 610mm, 762mm and 915mm) industrial flatwork ironing system (with built in primary folder). Built-In Accufold – The built-in automatic primary folder increases production and reduces labor cost. The Finish Master from CMV Sharper Finish can fold round tablecloths. Folded linen can be removed from the front or rear of the ironer.
Key Features
- Choice of 120″, 132″ and 136″ working width
- Available in Gas, Steam or Electrically Heated (see models for details)
- Intelatrol I and II Safety Devices standard on gas models, steam and gas (optional)
- Nomex padding and ribbons
- E.T.L. approved
- Safety features include front, rear, and side interlocked guards, 24v controls
- Canopy with exhaust motor and blower
- Ironed work delivered to front or rear
- Variable speed (standard), inverter drive (optional) standard on models 3000 & 3600
CMV Sharper Finish Ironer-Folder-Stacker-Conveyor
IFC/IFCS 2000, 2400, 3000 & 3600
20" (508 mm); 24" (610 mm); 30" (762 mm): 36" (915 mm).
Product Overview
CMV Sharper Finish IFC/IFCS all-in-one models, industrial flatwork ironing system. IFC – Ironer with built-in folder and crossfolder. Dries, irons, primary folds, and crossfolds. The larger the diameter of the ironing cylinder, the more pieces the IFC will dry, iron, and fold. IFCS– Ironer with built-in folder, crossfolder, stacker-conveyor. Dries, irons, primary folds, crossfolds, stacks, and returns to the front. With the IFCS stacker, only two operators are needed. For those ‘tight space’ on premise or commercial laundries. Linen goes in, and returns ironed, folded, and stacked!
Key Features
- Four production sizes are available: 20″ (508 mm); 24″ (610 mm); 30″ (762 mm): 36″ (915 mm).
- Choice of 120″ (3050 mm); 132″ (3353 mm) and 136″ (3400mm)
- Gas and Steam heating
- Many safety advantages, Intelatrol I and II monitoring system
- Inverter drive, variable speed range 20-100 FPM scope
- Left or right discharge for cross folded linens
- Front or rear discharge for linens with primary folds